Product overview
Thermal shock test chamber is used to test the resistance ability of specimen in extreme high and low temperature cycling environment, which is test the chemical change or physical damage due to heat expansion and cold contraction in short period.
Structural features
- Temperature impact range: -65-+220.
- Temperature resolution: ≤0.1.
- Refrigeration system: single self-stacking
- Refrigerant: mixed refrigerant
- Temperature monitoring: 1 T-type thermocouple 1 K
- Type thermocouple
- System interface: USB, LAN, GPIB, RS232
- Controller: Siemens controller
- Temperature conversion time: ≤10S
- Temperature fluctuation: ±0.3
- Cooling mode: air-cooled
- Heat exchanger: casing type
Application
The working principle of Thermal shock test chamber is applicable to all kinds of semiconductor chips, flash memory, Flash/EMMC, PCB circuit board IC, optical communication (such as transceiver, transceiver high and low temperature test, SFP optical module high and low temperature test, test, etc.), the electronics industry, etc. for IC features analysis, as well as high and low temperature
cycling, cycle test, temperature impact test, failure analysis and other reliability tests.
- Features analysis, cycling test, impact test, failure analysis
Control method
Temperature adopts anti-integral saturation PID + automatic tuning function
Humidity adopts anti-integral saturation PID + automatic tuning function
Parameters
|
Model |
TST-50AX10S |
TST-60AX12S |
TST-70AX20S |
|
|
External size mm |
W:580*H:1080*D:850 |
W:580*H:1080*D: 850 |
W: 580*H: 1080*D: 850 |
|
|
Swivel arm range |
1500mm |
|||
|
Temp range |
180℃-50℃ |
200℃--60℃ |
220℃--75℃ |
|
|
Impact scope |
85 to-40℃ |
85 to-55℃ |
85 to-65℃ |
|
|
Temp change rate |
≤10S(air temperature) |
≤15S (air temperature) |
≤35S (air temperature) |
|
|
Refrigeration system |
Auto-cascade |
|||
|
Cooling method |
Air-cooled |
|||
|
Temp resolution |
0.1℃ |
|||
|
Defrosting cycle |
Approx. 15 days |
|||
|
Glass hood size |
Diameter:140mm Height: 55mm (inner diameter) |
|||
|
Working mode |
High Temp-Normal Temp-Low Temp/High Temp-Low Temp/High Temp-Normal Temp/Low Temp-Normal Temp/Linear/Custom Programming |
|||
|
Operating mode |
Program / Fixed Value |
|||
|
Measurement mode |
Air Mode/Sample Mode |
|||
|
Intake pressure |
5.0KG-7.5KG(Temp.15℃-25℃) Oil contents≤0.01PPM |
|||
|
HMI |
7-inch 800*480 dot matrix TFT color LCD monitor |
|||
|
Power |
Single-phase,220V50HZ,26A |
|||
|
Max power |
5.2KW |
5.5KW |
5.8KW |
|
|
Max current |
23A |
24A |
25A |
|
|
Intake pressure |
5.0KG-7.5KG(Temp.15℃-25℃) |
|||
Hot Tags: thermal shock test chamber, China thermal shock test chamber manufacturers, suppliers, thermal shock machine, Walk in Temperature and Humidity Chamber, Thermal Shock Test Chamber, Rapid Temperature Change Test Chamber, temperature shock test chamber, Rapid Temperature Cycling Chamber
